Single-stage boat polishing
All polishing steps covered by a single product
Speedy elimination of flaws, combined with outstanding shine
Ease of use, even on large surface areas

1. Before Polishing: clean the surface well.

2. Shake the bottle and pour the product onto the polishing pad. Please note: the bigger the pad, the more Gelcoat One-Step you need.

3. Use the Menzerna Heavy Cut Foam Pad or Lambswool Pads, if there are signs of heavy use on the surface.

4. When using a rotary polishing machine, work in a cross-pattern.

5. At the beginning, run the polish at a low speed and apply strong pressure on the polishing machine. In the final steps, you increase the speed and reduce the pressure on the polishing machine.

6. Apply the Gelcoat Premium One-Step Polish until only a slightly transparent or oily film can be seen and remove polish residues with a premium microfiber cloth.

7. To increase the gloss of the surface even further, you can use the product a second time or you can apply the Gelcoat Premium Gloss afterwards. In both cases this step should be done with the Menzerna Soft Cut Foam Pad.